Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Napa 24-in Aluminum Exterior Bollard Light

The Napa 24-in Aluminum Exterior Bollard Light stands 23-7/8", which is the working height for a bollard: tall enough to spread light across the width of a path, short enough that the source stays out of the eyeline. It puts out 2520 lumens of 3000K light at 24W.

Black Finish and Build

The fixture is Aluminum + Glass, Black, at L6-3/8" x W6-3/8" x H23-7/8". It carries a wet, IP65 rating for permanent exterior exposure. The glass panel is high impact rather than standard, which matters on a fixture at shin height.

Specifications and Design Details

The specs that matter before you buy: 2520 lumens at 24W; 3000K color temperature; 90 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet, IP65 location rated; light aimed downward; overall size L6-3/8" x W6-3/8" x H23-7/8"; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. At the top and bottom of exterior steps, where a change in level needs to be visible before someone reaches it. Set into a planting bed along a border, close enough to the edge that the light reaches the path. On a commercial site or a multi-unit property, where the 120-277V universal input matters because the circuit may well be 277V. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2520 lumens from 24W, no bulbs to buy
  • 90 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum + Glass housing in Black
  • Wet, IP65 location rated, IP65 sealed against driven rain
  • 120-277V universal input, works on 120V or 277V circuits
  • 23-7/8" tall, L6-3/8" x W6-3/8" x H23-7/8"
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? Modern Lights ships this line from stock and answers the phone when a spec does not match your site. Nothing here is guesswork. It is pulled from the manufacturer documentation linked above.