Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Chadworth 18-in Aluminum Exterior Bollard Light

The Chadworth 18-in Aluminum Exterior Bollard Light stands 18-1/8" off the ground, which puts it below the sightline and keeps the light on the surface rather than in anyone's eyes. It produces 2500 lumens of 3000K light aimed downward, from a Aluminum body rated wet.

Black Finish and Build

The housing is Aluminum, finished in Black. It measures D6-3/8" x H18-1/8", and the wet rating covers driven rain and hose-down cleaning. The lens is a frosted PC diffuser.

Specifications and Design Details

The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H18-1/8"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. Flanking a front walk or a gate, in a pair, which reads as an entrance from the street. At the top and bottom of exterior steps, where a change in level needs to be visible before someone reaches it. Set into a planting bed along a border, close enough to the edge that the light reaches the path. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2500 lumens from 24W, no bulbs to buy
  • 80 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum housing in Black
  • Wet location rated
  • 120-277V universal input, works on 120V or 277V circuits
  • 18-1/8" tall, D6-3/8" x H18-1/8"
  • Frosted PC Diffuser lens
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? We sell lighting and nothing else, which is why we can talk through spacing, mounting, and 277V circuits without transferring you. The spec sheet and installation instructions are linked on this page for you to read yourself.