Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Blaine 37-in Aluminum Exterior Bollard Light

The Blaine 37-in Aluminum Exterior Bollard Light stands 37" tall. A bollard at this height covers more ground per fixture, so a long path takes fewer of them and the spacing looks less mechanical. It produces 2500 lumens of 3000K light and is rated wet.

Black Finish and Build

The fixture is Aluminum, Black, at D6-3/8" x H37". It carries a wet rating for permanent exterior exposure. The lens is a frosted PC diffuser.

Specifications and Design Details

The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H37"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. Set into a planting bed along a border, close enough to the edge that the light reaches the path. On a commercial site or a multi-unit property, where the 120-277V universal input matters because the circuit may well be 277V. Around a parking area or a service path, where a wet rated housing has to survive snow clearing and irrigation. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2500 lumens from 24W, no bulbs to buy
  • 80 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum housing in Black
  • Wet location rated
  • 120-277V universal input, works on 120V or 277V circuits
  • 37" tall, D6-3/8" x H37"
  • Frosted PC Diffuser lens
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? Every spec on this page comes from the manufacturer documents, not a catalog blurb. Bollards are a spacing decision as much as a fixture decision, so if you tell us the run length and the path width we will tell you how many you need. Free shipping on orders over $99.