Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Blaine 29-in Aluminum Exterior Bollard Light

The Blaine 29-in Aluminum Exterior Bollard Light is the standard height in its family at 29-1/4". It draws 24W on 120-277V, produces 2500 lumens of 3000K light aimed downward, and is built from Aluminum for wet exposure.

Black Finish and Build

The fixture is Aluminum, Black, at D6-3/8" x H29-1/4". It carries a wet rating for permanent exterior exposure. The lens is a frosted PC diffuser.

Specifications and Design Details

The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H29-1/4"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. Flanking a front walk or a gate, in a pair, which reads as an entrance from the street. At the top and bottom of exterior steps, where a change in level needs to be visible before someone reaches it. Set into a planting bed along a border, close enough to the edge that the light reaches the path. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2500 lumens from 24W, no bulbs to buy
  • 80 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum housing in Black
  • Wet location rated
  • 120-277V universal input, works on 120V or 277V circuits
  • 29-1/4" tall, D6-3/8" x H29-1/4"
  • Frosted PC Diffuser lens
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? Every spec on this page comes from the manufacturer documents, not a catalog blurb. Bollards are a spacing decision as much as a fixture decision, so if you tell us the run length and the path width we will tell you how many you need. Free shipping on orders over $99.