Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Blaine 18-in Aluminum Exterior Bollard Light

A bollard this short is a ground marker rather than a path light. The Blaine 18-in Aluminum Exterior Bollard Light is 17-3/8" tall and 6-3/8" across, throwing 2500 lumens downward onto whatever it stands beside. The housing is Aluminum, rated wet.

Black Finish and Build

Aluminum makes up the body, in Black. Overall it is D6-3/8" x H17-3/8". The wet rating is what allows it to sit unprotected in a bed or beside a drive. The lens is a frosted PC diffuser.

Specifications and Design Details

The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H17-3/8"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. Down a driveway or beside a turning circle, where the fixture marks the edge for a car as much as for a person. Flanking a front walk or a gate, in a pair, which reads as an entrance from the street. At the top and bottom of exterior steps, where a change in level needs to be visible before someone reaches it. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2500 lumens from 24W, no bulbs to buy
  • 80 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum housing in Black
  • Wet location rated
  • 120-277V universal input, works on 120V or 277V circuits
  • 17-3/8" tall, D6-3/8" x H17-3/8"
  • Frosted PC Diffuser lens
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? Order from us and you get the real spec sheet, the real installation instructions, and a person who has read both. We stock current product, we ship quickly, and we do not list what we cannot support.