


Pairs well with
24/7 Customer Support
FREE USA Shipping
Hassle-Free Installation

Alden 31-in Aluminum Exterior Bollard Light
Alden 31-in Aluminum Exterior Bollard Light
The Alden 31-in Aluminum Exterior Bollard Light stands 31-1/2", which is the working height for a bollard: tall enough to spread light across the width of a path, short enough that the source stays out of the eyeline. It puts out 2500 lumens of 3000K light at 24W.
Black Finish and Build
The fixture is Aluminum, Black, at D6-3/8" x H31-1/2". It carries a wet rating for permanent exterior exposure. The lens is a frosted PC diffuser.
Specifications and Design Details
The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H31-1/2"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.
Where This Bollard Works
A few places this one earns its spot. At the top and bottom of exterior steps, where a change in level needs to be visible before someone reaches it. Set into a planting bed along a border, close enough to the edge that the light reaches the path. On a commercial site or a multi-unit property, where the 120-277V universal input matters because the circuit may well be 277V. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.
Highlights
- 2500 lumens from 24W, no bulbs to buy
- 80 CRI for accurate color on planting, brick, and paving
- 3000K output
- Dims 100% to 10% on TRIAC/ELV controls
- Aluminum housing in Black
- Wet location rated
- 120-277V universal input, works on 120V or 277V circuits
- 31-1/2" tall, D6-3/8" x H31-1/2"
- Frosted PC Diffuser lens
- Integrated LED rated for 50,000 hours
- ETL listed for wet locations
Why Buy From Modern Lights? We sell lighting and nothing else, which is why we can talk through spacing, mounting, and 277V circuits without transferring you. The spec sheet and installation instructions are linked on this page for you to read yourself.
Order Processing
Products are shipped within 2 business days after the order is received.
Shipping & Delivery
FREE shipping within the contiguous 48 U.S. states is available. For other arrangements, please contact us. 650 - 834 - 9600
Shipping Method: Standard Ground
Estimated Delivery Time: 5–7 business days
Shipping Cost: FREE
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
