Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer
Summer Blast Sale Flat 10% off Shop new arrivals Limited time offer

Alden 20-in Aluminum Exterior Bollard Light

The Alden 20-in Aluminum Exterior Bollard Light stands 19-5/8" off the ground, which puts it below the sightline and keeps the light on the surface rather than in anyone's eyes. It produces 2500 lumens of 3000K light aimed downward, from a Aluminum body rated wet.

Black Finish and Build

Aluminum makes up the body, in Black. Overall it is D6-3/8" x H19-5/8". The wet rating is what allows it to sit unprotected in a bed or beside a drive. The lens is a frosted PC diffuser.

Specifications and Design Details

The specs that matter before you buy: 2500 lumens at 24W; 3000K color temperature; 80 CRI; an LED with DC Driver rated for 50,000 hours; dims 100% to 10% on TRIAC/ELV controls; 120-277V universal input; wet location rated; light aimed downward; overall size D6-3/8" x H19-5/8"; frosted PC diffuser lens; ETL listed. The dimmer is sold separately, so check your existing control before you order. The universal 120-277V input is worth noting on a residential job too, because it means the same SKU works if the circuit turns out not to be 120V.

Where This Bollard Works

A few places this one earns its spot. Along a walkway or a garden path, spaced so the pools of light overlap rather than leaving dark gaps between them. Down a driveway or beside a turning circle, where the fixture marks the edge for a car as much as for a person. Flanking a front walk or a gate, in a pair, which reads as an entrance from the street. Bollards are usually mounted to a concrete base with an anchor kit, so plan the conduit run before the concrete goes in rather than after.

Highlights

  • 2500 lumens from 24W, no bulbs to buy
  • 80 CRI for accurate color on planting, brick, and paving
  • 3000K output
  • Dims 100% to 10% on TRIAC/ELV controls
  • Aluminum housing in Black
  • Wet location rated
  • 120-277V universal input, works on 120V or 277V circuits
  • 19-5/8" tall, D6-3/8" x H19-5/8"
  • Frosted PC Diffuser lens
  • Integrated LED rated for 50,000 hours
  • ETL listed for wet locations

Why Buy From Modern Lights? Every spec on this page comes from the manufacturer documents, not a catalog blurb. Bollards are a spacing decision as much as a fixture decision, so if you tell us the run length and the path width we will tell you how many you need. Free shipping on orders over $99.